Ignition System & Timing Tools

Automotive

material

product_type

brand

categoryId

stockStatus

rangeable_number_of_pieces

Automotive Tools

Service Tools

Kennedy

1/2” square drive. 22mm hex. x 90mm length. Cutaway section allows socket to pass overwiring.

Designed specifically for working with a vehicle oxygen sensor, this oxygen sensor socket from Kennedy® is a specialist tool made from high-quality materials. Suitable for working with both heated and non-heated oxygen sensors, the side cut-out design allows for easy accessibility to the sensor and prevents any scraping damage to wiring or surrounding areas.

Features and Benefits
• Suitable for use with both a ratchet and a torque wrench for versatility and convenience
• Manufactured from chrome vanadium steel for quality and durability
• The 22mm socket offers a universal fit to all hexagon oxygen sensors

Typical Applications
• Automotive

Oxygen Sensor Socket

22mm Socket to fit Vehicle Hexagon Oxygen Sensors

Two size tips allow you to remove oil or grease seals from virtually anything including wheel bearings, transmission housings, etc. Hardened and tempered carbon steel shank and head with oxidised finish tips, chrome plated shank for protection against corrosion. Impact resistant square section handle for secure grip even when greasy.
Overall length: 310mm (12 1/4”).

A sturdy and reliable seal puller tool, allowing you to remove oil or grease seals with ease.

Features and Benefits
• Two size tips allow you to remove oil or grease seals from virtually anything including wheel bearings, transmission housings, etc. 
• Hardened and tempered carbon steel shank and head with oxidised finish tips for ultimate durability
• Chrome plated shank for protection against corrosion
• Impact resistant square section handle for a secure grip - even when greasy

Notes
• Overall length: 310mm (12 1/4")

Seal Puller Tool

SEAL PULLER TOOL

Kennedy-Pro

Suitable for the removal of hard to reach glow plug connectors found on the latest generation of engines. Made from chrome vanadium steel. Composite handle provides added comfort and control. Blade length: 125mm.

Professional Glow Plug Connector Pliers

GLOW PLUG CONNECTOR PLIERS STRAIGHT JAW

GLOW PLUG CONNECTOR PLIERS ANGLED JAW

To enable fast Installation or removal of rubber anti-vibration mounting rings found on modern exhaust systems. Puller has offset hook for easier application and dipped vinyl handle for added comfort and extra grip. Manufactured from hardened steel. Length: 290mm

Exhaust Doughnut Puller

DOUGHNUT STRETCHER

Specifically designed for the cleaning and recutting of injector seats. For use with Bosch, Delphi, Iveco, Fiat and other universal applications. 
Includes: five cutting reamers, pilot post, 
T-bar and a hexagon key.

Specifically designed for the cleaning and recutting of injector seats. For use with Bosch, Delphi, Iveco, Fiat and other universal applications. 
Includes: Five cutting reamers, pilot post, T-bar and a hexagon key.

Diesel Injector Seat Cutter Set

DIESEL INJECTOR SEAT CUTTER SET 8-PCE

Double ended for 14mm and 18mm plug hole threads. Cleans corrosion and carbon build-up from female spark plug threads and sensor sockets. Repairs minor cross threading damage. Use with 21mm deep socket

Spark Plug Hole Thread Chaser

SPARK PLUG HOLE THREAD CHASER

For checking and setting ignition timing on automotive, agricultural and marine engines. Measures ignition spark advance from 0 - 60°. For use on 12V systems. Reverse polarity protected. Accurate to 8,000rpm. 1m long removable coiled power leads. Impact resistant metal case and rubber nose cone. On/off trigger switch. Bright linear Xenon flash tube for daylight use. Focused lens provides a concentrated light. Easy to apply inductive impulse pick-up. Built in check light.

Advance Timing Light

ADVANCE TIMING LIGHT

Three piece universal set. Essential for servicing today's computer-controlled vehicle systems. Easily removes exhaust gas oxygen sensors (known as ‘EGO’, ‘O2’ or ‘Lambda’ sensors), vacuum switches and pressur, Vauxhe switches. Also suitable for diesel injectors found on Mitsubishi, Nissan, Opelall and VW vehicles. Made from heat treated cast steel. 

Set contains: 
22mm (7/8”) hex, 1/2” square drive socket with 7.5mm side slot for sensor wire clearance. Socket has 22mm hex for use with a spanner. Overall length: 80mm. 
22mm (7/8”) hex, crow's foot style wrench, 1/2” square drive (double square for easy access). With full length 11mm slot for total clearance of switch/sensor wire
22mm (7/8”) hex, crow's foot style wrench, 3/8” square drive. With full length 8.6mm slot for total clearance of switch/sensor wire.

Three piece universal set. Essential for servicing today's computer-controlled vehicle systems. Easily removes exhaust gas oxygen sensors (known as 'EGO', 'O2' or 'Lambda' sensors), vacuum switches and Vauxhall pressure switches. Also suitable for diesel injectors found on Mitsubishi, Nissan, Opel and VW vehicles. Made from heat treated cast steel. 

Set contains: 
22mm (7/8") hex, 1/2" square drive socket with 7.5mm side slot for sensor wire clearance. Socket has 22mm hex for use with a spanner. Overall length: 80mm. 
22mm (7/8") hex, crow's foot style wrench, 1/2" square drive (double square for easy access). With full length 11mm slot for total clearance of switch/sensor wire
22mm (7/8") hex, crow's foot style wrench, 3/8" square drive. With full length 8.6mm slot for total clearance of switch/sensor wire.

Ignition System & Timing Tools

Kennedy

22mm Socket to fit Vehicle Hexagon Oxygen Sensors

Kennedy

SEAL PULLER TOOL

Kennedy-Pro

GLOW PLUG CONNECTOR PLIERS STRAIGHT JAW

2 Variations

Kennedy-Pro

GLOW PLUG CONNECTOR PLIERS ANGLED JAW

2 Variations

Kennedy

DOUGHNUT STRETCHER

Kennedy

DIESEL INJECTOR SEAT CUTTER SET 8-PCE

Kennedy

SPARK PLUG HOLE THREAD CHASER

Kennedy

ADVANCE TIMING LIGHT

Kennedy

OXYGEN SENSOR SOCKET SET 3-PCE

Key Information

Group Policies

© 2024 Cromwell. All rights reserved.